# Council Decision of 13 November 2012 on the signing and conclusion of the Agreement between the Government of the United States of America and the European Union on the coordination of energy-efficiency labelling programmes for office equipment (Text with EEA relevance) (2013/107/EU), Division: Number of Units Required for Test


Testing will be conducted by the manufacturer or its authorised representative on a single unit of a model.
(a) For products listed in section B, Table 1, of these specifications, if the initial unit tested has TEC test results that meet the eligibility criteria but are within 10% of the limit, one additional unit of the same model must also be tested. Manufacturers must report values for both units. To qualify as ENERGY STAR, both units must meet the ENERGY STAR specification.
(b) For products listed in section B, Table 2, of these specifications, if the initial unit tested has OM test results that meet the eligibility criteria but are within 15% of the limits in any of the specified operating modes for that product type, then two more units must be tested. To qualify as ENERGY STAR, all three units must meet the ENERGY STAR specification.

---
Source: https://www.legislation.gov.uk/eudn/2013/107/schedule/ANNEX C/division/III./division/D./division/1./division (the official version)
Page: https://openlegislation.uk/eu-decision-2013-107/schedule-ANNEX C/division-III./division-D./division-1./division
Contains public sector information licensed under the Open Government Licence v3.0. Source: legislation.gov.uk, The National Archives.